This double sided test page checks duplex printing in one sheet. Side 1 has ring targets, a black show-through block, letters on every edge and a scale ruler. Side 2 has crosses printed at exactly the same spots as the rings, so when you hold the sheet against a window, you can see whether both sides line up and by how many millimetres.
It also shows whether the printer flips on the edge your document needs. Print it as a 2 sided test page from the browser or download the duplex test page PDF, on US Letter or A4, for long edge or short edge flip. It works with inkjet and laser printers, with automatic or manual duplex.
How to print the double sided test page
- Choose US Letter or A4, and the flip edge. Flip on long edge is right for normal portrait documents.
- Press Print both sides.
- In the print dialog, turn on two-sided printing and choose the same flip edge. Set the scale to 100% or Actual size, and the margins to None.
- Print. One sheet comes out with side 1 on the front and side 2 on the back.
- Turn the sheet over the way the preview shows. Side 2 should be upright, with its arrow pointing to the same edge as side 1.
- Hold the sheet against a window or a lamp and look at the crosses and rings, then answer How did side 2 come out? under the preview.
If the print dialog has no two-sided option, your printer may not have automatic duplex. Use the manual method further down this page.
What each part of the duplex test page checks
| Part | Side | What it checks | A good result |
|---|---|---|---|
| Big 1 and 2 with TOP arrows | Both | Which edge the printer flipped on | Side 2 upright, arrows on the same edge |
| Ring targets and crosses | 1 and 2 | How well the sides line up | Each cross inside the 1 mm ring |
| Edge letters A to D | Both | That the sheet was turned the expected way | A behind A, B behind B |
| Black block and fine text | 1 and 2 | Show-through on your paper | A faint shadow at most |
| Rulers | 1 | Print scale | 100 mm and 4 in exactly |
| Check list | 2 | A record of the result | Every box ticked |
Flip on long edge or short edge
The flip setting tells the printer how the pages will be turned when someone reads them. Choose it to match the document, not the printer.
| Setting | Turns like | Use it for |
|---|---|---|
| Flip on long edge | A book, left to right | Portrait letters, reports, books and most documents |
| Flip on short edge | A notepad or calendar, top over bottom | Landscape pages, slides, documents bound at the top |
If the back pages come out upside down, the document was printed with the other setting. This page shows it straight away: with the wrong flip, side 2 is upside down and the edge letters do not match side 1.
How to print double sided on Windows, Mac and Word
- Chrome and Edge print dialog: open More settings, tick Print on both sides and pick Flip on long edge or Flip on short edge.
- Windows printer settings: in the print dialog choose Printer properties or Preferences, then look under Layout, Finishing or Paper for Print on both sides or Two-sided printing.
- Mac: in the print dialog turn Two-Sided on. In the Layout section, Two-Sided has Long-Edge binding and Short-Edge binding.
- Microsoft Word: File, Print, then change Print One Sided to Print on Both Sides, with flip pages on long edge or short edge. Manually Print on Both Sides walks you through manual duplex.
- HP Smart, Epson, Canon and Brother apps: the setting is usually called 2-Sided, Duplex or Print on Both Sides in the print options.
Some printer drivers turn two-sided printing on by default. If every job prints on both sides when you do not want it, switch it off in the printer's default preferences in Windows Settings or the printer app.
How to print double sided manually
Printers without a duplex unit can still print on both sides with a little help.
- Mark the top of a blank sheet with a pencil arrow and the word "up". Load it on its own and print side 1 of this page.
- Look where the printing landed: on the marked side or the other one, and at the arrow end or the other end. That tells you how to reload paper.
- Print the odd pages of your document first.
- Put the printed stack back in the tray, turned the way the test showed, so side 2 lands on the blank back the right way up.
- Print the even pages. In Word, Manually Print on Both Sides does steps 3 to 5 for you and pauses for you to reload.
Let inkjet pages dry for a minute before reloading, or the rollers can smear wet ink.
Both sides do not line up
A cross sitting outside the 2 mm ring means side 2 is shifted. Try these in order:
- Scale: the print must be at 100%. Fit to page shrinks each side slightly differently. Measure the rulers on side 1: they should read 100 mm and 4 in.
- Paper size: the size in the print dialog must match the paper in the tray. Letter paper printed as A4, or the other way round, shifts the back side by a few millimetres.
- Paper guides: slide the tray guides against the stack, without bending it. Loose guides let the sheet drift as it turns over.
- Damp or curled paper feeds unevenly on the return trip. Use paper from a fresh, flat ream.
- Laser printers: many have a duplex registration or image position setting in the menu or the web settings page, which moves side 2 in small steps.
If the front side alone prints crooked or off center, print the printer alignment page first. It shows skew and margins on a single side.
Print showing through the paper
When the black block on side 1 shows clearly behind the text on side 2, the paper is too thin for the amount of ink.
- Use heavier paper: 90 to 100 g/m², sold as 24 lb in the US, is opaque enough for most double sided color printing.
- Choose a draft or normal quality setting instead of best, which lays down less ink.
- On inkjet printers, a longer drying time between sides, often in the printer's advanced settings, stops wet ink from smudging and soaking through.
Black and white documents on standard 80 g/m² paper are usually fine. Check toner and ink density on a single side with the black and white print test page.
The printer will not print on both sides
- The option is missing from the print dialog: the printer may have no duplex unit, or the driver does not know it is fitted. In the printer's properties, look for an installable options or device settings tab and set the duplex unit to Installed.
- It prints side 2 on a new sheet: two-sided printing was off for that job. Turn it on in the print dialog of the app you print from as well as in the printer settings.
- Paper jams when it turns over: the paper may be too heavy or too light for the duplex path. Most duplex units take 60 to 105 g/m². Check the rear access door is closed properly.
- Only some paper sizes work: many printers duplex Letter and A4 only, not envelopes, cards or photo paper.
For brand specific menus, the hp printer test page and the brother printer test page list where each series keeps its settings and reports.
What is duplex printing?
Duplex printing means printing on both sides of each sheet. A printer with automatic duplex prints the first side, pulls the sheet back in, turns it over inside and prints the second side. Manual duplex does the same with you turning the paper.
Duplex is slower than printing one side, since every sheet passes through twice, and inkjets pause to let the first side dry. It halves the paper you use and makes documents thinner and easier to bind.
Other printer checks
For colors, text and missing inks on a single side, print the general printer test page. If lines or colors are missing on either side, run a nozzle check first. All test pages, including this one, are also on the printer test page pdf page for printing from a phone or another computer.
Double sided printing questions
How do I print a double sided test page?
Choose US Letter or A4 and the flip edge above, then press Print both sides. In the print dialog, turn on two-sided printing, pick the same flip edge, set the scale to 100% and the margins to None. Both sides go to the printer as one job and come out on a single sheet.
What is the difference between flip on long edge and flip on short edge?
Flip on long edge turns the back page like a book, along the long side of the paper. It is right for normal portrait documents. Flip on short edge turns it top over bottom, like a notepad or wall calendar, and suits landscape pages and documents bound at the top.
What is duplex printing?
Duplex printing is printing on both sides of the paper. Automatic duplex printers turn the sheet over inside the printer. Manual duplex means you print one side, put the sheets back in and print the other.
Why is the back of my double sided print upside down?
The printer flipped on the other edge from the one your document needs. A portrait document printed with Flip on short edge comes out with every back page upside down. Switch to Flip on long edge in the print dialog, then print this test page again to confirm.
How do I print double sided manually?
Print only the odd pages first. Put the printed stack back in the paper tray, turned the way your printer needs, then print the even pages. To find the right way round, mark the top of a blank sheet, print side 1 of this test page on it, and see which side and which end the printer used.
How far off can the two sides be?
Home inkjet and laser printers usually line the sides up within 1 to 2 mm. Office lasers often manage under 1 mm. More than 2 mm off usually means a paper size mismatch, scaling or loose paper guides rather than a fault.
Why does the print show through the paper?
Standard 75 to 80 g/m² (20 lb) paper lets dark areas show through on the back. For double sided color printing, 90 to 100 g/m² (24 lb) paper keeps the sides apart. The black block on side 1 shows how much your paper lets through.
Can I download the double sided test page as a PDF?
Yes. Press Download PDF for a two page PDF in the paper size and flip you chose. Print it from any PDF reader with two-sided printing on. There are four versions: US Letter and A4, each for long edge and short edge.