This black level test pattern shows numbered squares and bars just above black, so you can see whether your screen shows shadow detail or crushes it, and whether black looks truly black or a washed out grey. A stretched dark gradient and a white level pattern finish the check.
It works on monitors, laptops, TVs and projectors in any browser. Use it to set brightness, to check the HDMI black level setting, and to compare two screens side by side.
How to check black level
- Dim the room. Bright light on the screen hides the darkest steps.
- Set the screen to its normal picture mode and brightness.
- Press Start full screen test. The first pattern shows squares numbered 1 to 20 on black.
- Find the first square you can see from your normal seat. Square 3 is the target for a PC screen.
- Press Space for the next patterns: the near black bars, the dark gradient, 5% grey, plain black, the white level and the contrast bars.
- Change brightness or the black level setting until the squares look right, and check again.
What the patterns show
| Pattern | What to look for | If it is wrong |
|---|---|---|
| Black level squares | Squares from 3 to 20 visible, background black | Squares missing: shadows crushed. Square 1 bright: black lifted |
| Near black bars | The 1% bar vanishes, the 2% bar just shows | Both show: brightness too high. Neither shows: too low |
| Dark gradient | 65 even steps from black to dark grey | Steps merge into black at the left |
| Grey 5% | An even, very dark grey | Patches or glow at the edges are uniformity or bleed |
| Black | Pure black | A glow or patches, mostly on LCDs |
| White level | Squares up to about 250 visible on white | Squares melt into white: contrast too high |
| Contrast bars | The 98% bar visible against white | Bars melt: contrast too high |
Shadows are crushed: squares vanish
If you cannot see squares up to 5 or 6, the darkest shades are being turned into black. Dark scenes in films and games then lose detail.
- Raise Brightness on the monitor or TV a few steps, or raise the Black level or Shadow setting where the menu has one.
- Range mismatch: the PC sends full range but the screen expects limited range. Set the screen's HDMI black level to High, Full or Normal for PC use.
- Gamma too high: set gamma to 2.2 in the monitor menu.
- Dynamic contrast or "black equalizer" modes play with shadows on purpose. Turn them off for the test.
Black looks grey: square 1 is clearly visible
If the background looks dark grey instead of black and every square shows easily, black is lifted.
- Lower Brightness a few steps.
- Range mismatch the other way: the graphics card sends limited range to a screen that expects full range. Set the card to full range:
- NVIDIA: Control Panel, Change resolution, set Output dynamic range to Full.
- AMD: AMD Software, Display, set Pixel Format to RGB 4:4:4 Pixel Format PC Standard (Full RGB).
- Intel: Intel Graphics Software, set Quantization Range to Full.
- LCD panels cannot reach true black, because the backlight leaks through. A grey glow on the Black pattern in a dark room is normal for IPS. Patches at the edges are backlight bleed, which the backlight bleed test checks separately.
Setting black level on a TV
TVs use different names: HDMI Black Level, RGB Range, Black Level, HDMI Dynamic Range. The rule is the same: the TV and the source must agree.
| Source | Usually sends | TV setting |
|---|---|---|
| PC or laptop | Full range RGB | High, Full or Normal |
| Blu-ray player, streaming box | Limited range video | Low, Limited or Auto |
| Game console | Set in the console | Match the console, or both on Auto |
Then use the TV's Brightness with this pattern to find the point where square 3 just shows. The tv test pattern page has the full set of TV setup charts.
Check for banding near black
Smooth dark gradients matter as much as the black point. If the Dark gradient here shows big steps or tinted blocks, run the banding test, which has more gradients and the fixes for each cause.
What a black level test cannot measure
Your eyes judge the result, so room light and how long your eyes have adjusted change what you see. The test cannot measure the screen's real black in candelas per square meter. A colorimeter does that.
Browsers send 8-bit color, so the squares are levels 1 to 20 out of 255. HDR black level works differently and needs HDR content. For the overall color balance after setting black and white, use the monitor color test.
Black level questions
What is black level on a monitor?
Black level is how dark the screen shows the darkest shades. Set right, black looks black and you can still see the first steps of dark grey. Set too low, shadows are crushed into black. Set too high, black looks grey and washed out.
How do I read the black level test?
The first pattern has numbered squares from 1 to 20 on black. At the right setting you can just see square 3 and all higher squares, and the background stays black. If you cannot see squares up to 5 or 6, raise brightness. If you can see square 1 clearly and black looks grey, lower it.
Should black level on my TV be low or high?
It depends on what the source sends. PCs send full range (0 to 255) and most video players send limited range (16 to 235). The TV setting must match: low, limited or normal for video sources, high or full for a PC. A mismatch crushes or lifts the shadows.
Why does black look grey over HDMI?
The graphics card is probably sending limited range RGB, where black is level 16, while the monitor expects full range, where black is 0. Set the graphics card to full range, or set the monitor's HDMI black level to match.
Does an OLED pass the black level test?
An OLED's black is fully off, so the background is perfect. The test then checks that the first steps above black still show. Some OLEDs crush the first few levels, which hides detail in dark scenes.
Which setting changes black level, brightness or contrast?
On most monitors and TVs, the Brightness control sets the black level and Contrast sets the white level. On some LCD monitors, Brightness only changes the backlight. Then use the Black level, Shadow or Gamma setting in the menu instead.