RetestPC

Sensitivity Converter

Pick the game you play now and the game you are moving to, type your sensitivity and DPI, and get the setting that turns exactly the same distance.

16 games, including Valorant, CS2, Apex and FortniteAny mouse and DPI
Convert between games
From
To
New sensitivity
0.393
Per full turn
41.6cm
Same in both games
eDPI before
1000
Counter-Strike 2
eDPI after
320
Valorant
Feel
Slow
By cm per 360
Typical for tactical shooters such as Counter-Strike 2 and Valorant, with arm aim on a large pad.
45 cm mouse pad 41.6 cm for 360°
Same feel in other gamesAt 800 DPI
GameSensitivityeDPI
Sensitivity for a target turn
cm

Change DPI, keep the same feel
DPI

Hip fire only. Scoped and aim down sights settings use their own multipliers in each game. Games marked * use a turn rate measured by players: check it once with a full turn.

Calculated in your browser. Your settings are remembered on this device only.

This mouse sensitivity converter carries your aim from one game to another. It matches the distance you move the mouse for a full turn, so 1.25 in Counter-Strike 2 becomes 0.393 in Valorant, 4.17 in Overwatch 2 or 5% in Fortnite at the same DPI.

It covers 16 games, lets you change DPI at the same time, and shows the matching setting in every game at once. Everything is calculated in your browser.

How to convert your sensitivity

  1. In From, pick the game you play now and type its Sensitivity and your mouse DPI.
  2. In To, pick the game you are moving to. New DPI follows your DPI unless you change it.
  3. Read New sensitivity, press the copy key next to it and paste it into the game.
  4. Check Per full turn: it is the same in both games, which is the point.
  5. Press the swap key to convert back the other way.
  6. Scroll the Same feel in other games table for every other game at once.

Common conversions at the same DPI

From To Multiply by Example
Counter-Strike 2 Valorant 0.314 1.25 → 0.393
Valorant Counter-Strike 2 3.18 0.4 → 1.27
Counter-Strike 2 Overwatch 2 3.33 1.25 → 4.17
Valorant Overwatch 2 10.6 0.4 → 4.24
Apex Legends Counter-Strike 2 1 1.5 → 1.5
Counter-Strike 2 Fortnite (%) 3.96 1.25 → 4.95
Overwatch 2 Call of Duty 1 5 → 5

Games built on the Source engine, like Counter-Strike 2, Apex Legends and Team Fortress 2, share the same turn rate, so the number carries over unchanged. Overwatch 2 and recent Call of Duty games also share one.

How the conversion works

Every game turns the camera a fixed angle per mouse count at sensitivity 1. Counter-Strike 2 turns 0.022 degrees, Valorant 0.07 and Overwatch 2 0.0066. Multiply that by your sensitivity and your DPI and you get degrees per inch of mouse travel.

The converter finds the sensitivity in the new game that gives the same degrees per inch. From that it also works out the cm per 360, the distance for a full turn, which is the clearest way to compare settings.

Matching a target cm per 360

Some players pick a distance first, for example 35 cm for a full turn, and set every game to it. Type the distance in Sensitivity for a target turn and the converter gives the setting for the game in To, at your DPI.

For a single game's eDPI and a check of how your current setting feels, use the edpi calculator.

Changing DPI and game together

If the new game feels better at a different DPI, type it in New DPI. The converter accounts for both changes at once. Going from 400 to 800 DPI halves the sensitivity you need.

Mouse sensors are not always exact. Measure your real DPI with the mouse dpi checker before converting, especially when you change mouse at the same time.

The converted sensitivity still feels wrong

  • Field of view differs between games. A wider view makes the same turn look slower on screen. The full turn still matches, but small corrections feel different.
  • Mouse acceleration in Windows or in the game changes the result depending on speed. Turn off Enhance pointer precision in Windows, or turn on raw input in the game.
  • Aim down sights and scopes have separate multipliers in each game. Set hip fire first, then adjust those to taste.
  • Low or uneven frame rate makes aim feel heavy. Check your mouse with the polling rate test and your click delay with the mouse latency test.
  • A different mouse with another shape or weight feels different even at the same numbers.

Give it a few sessions and track your scores in the aim test before deciding to change the setting.

Games marked with a star

Marvel Rivals, Deadlock, Halo Infinite, The Finals and Aim Lab carry a star. Their turn per count is not published, so the value comes from player measurements. To check, set the converted sensitivity, mark a spot on your mouse pad, and turn a full circle. It should come back to the same view at the distance shown.

Rainbow Six Siege uses its default sensitivity multiplier of 0.02. If you changed the multiplier in its settings file, the converted value will be off by the same ratio.

What a sensitivity converter cannot do

It converts hip fire turn speed. It cannot match the scoped and aim down sights multipliers, the field of view or the controller settings in each game, and it cannot read your settings from the game. Type them exactly as the menu shows them.

Sensitivity converter questions

How do I convert my CS2 sensitivity to Valorant?

Divide your Counter-Strike 2 sensitivity by 3.18. 1.25 in CS2 becomes about 0.393 in Valorant at the same DPI. Pick Counter-Strike 2 in From and Valorant in To and the converter does it for you, rounded to the steps the menu accepts.

How do I convert Valorant sensitivity to CS2?

Multiply your Valorant sensitivity by 3.18. 0.4 in Valorant is about 1.27 in Counter-Strike 2. Both give a full turn every 40.8 cm at 800 DPI.

Does a sensitivity converter really make aim feel the same?

It makes the turn the same: the same mouse movement turns you the same angle in both games. Field of view, frame rate, mouse acceleration and the speed of the game still change how it feels, so expect a short period of getting used to it.

What is cm per 360?

It is the distance you move the mouse to turn a full circle in a game. It is the one number that stays the same across games, which is why the converter matches it. Low numbers are fast, high numbers are slow.

How do I convert Fortnite sensitivity?

Pick Fortnite (X axis %) and type the X axis percentage shown in the game, such as 6.4. To CS2, multiply the percentage by 0.253. To Valorant, multiply it by about 0.079.

Do I need to change my sensitivity when I change DPI?

Yes, to keep the same feel. Doubling DPI turns twice as far per movement, so halve your in-game sensitivity. Type the new DPI in New DPI and the converter gives the exact value.

Why are some games marked with a star?

Their developers do not publish the turn per count, so the value comes from player measurements. They are usually close, but check once by turning a full circle with the converted setting.