RetestPC

Keyboard Chatter Test

Press the keys you suspect about 20 times each at your normal pace. A key that sends a second press too soon after you let go turns orange and shows how many times it doubled.

Mechanical, membrane and laptop keyboardsWired, wireless and Bluetooth
Layout
40 ms
Keys tested
0
Pressed at least 5 times
Presses
0
Auto repeat not counted
Typed twice
0
Second press too soon
Worst key
None
Most double presses
Press each key you suspect about 20 times at your normal pace. Keys that send a second press too soon turn orange.
Keys that typed twice

None yet. A key shows here the first time it sends a second press within the limit.

Last presses, newest first
    Key presses are read by this page only and never stored or sent.

    This keyboard chatter test finds keys that type twice when you press them once. It times the gap between letting a key go and pressing it again, and flags any second press that comes too soon to be you. It also catches a key that sends two presses with no release between them.

    The keyboard drawing turns each clean key green and each chattering key orange, with a count of the extra presses. Use it on mechanical, membrane and laptop keyboards, wired or wireless, before you claim a warranty or open the keyboard.

    How to run the chatter test

    1. Pick the Layout that looks most like your keyboard. Every key works whichever you pick.
    2. Press a key you suspect about 20 times at your normal pace. Let it come all the way up each time.
    3. Press a few keys you trust too, so you can compare.
    4. Watch the drawing. Green means the key pressed cleanly at least five times. Orange means it sent a second press too soon, and the number shows how often.
    5. Read Keys that typed twice for the shortest gap each key produced, then press Copy report for a warranty claim.

    Holding a key down does not count as chatter. Your system repeats held keys on purpose, and the test ignores those repeats.

    What the results mean

    Result What it tells you
    Keys tested Keys pressed at least 5 times
    Presses Every press counted, without auto repeat
    Typed twice Second presses that came within the limit after a release
    Worst key The key that doubled most often
    Shortest gap The quickest press after a release for that key. Under 10 ms is almost always chatter

    No release in the table means the keyboard sent two presses without a key up between, which is another form of chatter.

    How chatter happens

    A key switch closes a circuit when you press it. The metal contacts touch, bounce apart for a moment and settle, all within a few milliseconds. The keyboard's firmware waits out that bounce, called debounce, before it reports the press.

    When the contacts are dirty, oxidised or worn, they bounce for longer than the firmware waits, and the keyboard reports two presses. That is why chatter often starts on the keys you use most: space, E, A, S and the arrow keys.

    How to fix a key that types twice

    Work through these in order. Most chatter is fixed by the first two.

    Clean the switch

    1. Unplug the keyboard or turn it off.
    2. Blow compressed air under the key from several angles in short bursts.
    3. On a mechanical keyboard, pull the keycap with a keycap puller and blow straight into the switch.
    4. Press the key quickly 50 to 100 times. This rubs the contacts and often clears light oxidation.
    5. Test again.

    Raise the debounce time

    Many gaming keyboards let you set the debounce time in their software, often in a performance or advanced menu. Raising it by a few milliseconds hides light chatter at the cost of a tiny delay. Check the change with the keyboard latency test if response speed matters to you.

    Use your system's filter for quick repeats

    • Windows 11: Settings, Accessibility, Keyboard, Filter keys. Turn it on, open its settings and turn on Ignore quick keystrokes.
    • Windows 10: Settings, Ease of Access, Keyboard, Use Filter Keys, then ignore quick keystrokes.
    • Linux: most desktops have Bounce Keys in their accessibility or keyboard settings.

    This filters every key on every keyboard, so set the shortest delay that works.

    Replace the switch or the keyboard

    On a hot-swap mechanical keyboard, pull the switch and fit a new one of the same type. On soldered boards, a switch can be desoldered and replaced, or a repair shop can do it.

    If the keyboard is under warranty, copy the report from this test and send it with your claim. It shows which keys doubled, how often and how quickly.

    Chatter on a laptop keyboard

    Laptop keys use a rubber dome over a membrane, not separate switches. Chatter there usually comes from crumbs, dust or a past spill.

    Turn the laptop off, tilt it and blow compressed air under the keys. Do not pull laptop keycaps unless you know the clip type, because they break easily. If the key still doubles, the keyboard usually has to be replaced as one part. The laptop keyboard test covers keys that stop working altogether.

    Other keyboard and mouse checks

    To check that every key works at all, use the keyboard tester online. For keys that drop out when several are held together, the anti ghosting test shows how many register at once.

    Mouse buttons chatter the same way. The mouse double clicking test finds a button that clicks twice. To see whether your typing suffers, take the 1 minute typing test before and after a fix.

    What a browser chatter test cannot see

    The test reads the presses your keyboard sends to the computer. Most keyboards already filter short bounces inside their firmware, so a switch can be slightly worn and still pass.

    Chatter that comes and goes may not show in a short test. If a key doubles now and then while you type, press it 50 or more times here, and test again when you notice the problem.

    Some keys, such as Fn on laptops and Mac keyboards, never reach the browser, so they cannot be tested here.

    Keyboard chatter questions

    What is keyboard chatter?

    Chatter is when one key press sends two or more presses, so a letter appears twice. Inside the switch, two metal contacts touch when you press. If they are dirty or worn they can bounce, and the keyboard reads the bounce as a second press a few milliseconds later.

    How do I test my keyboard for chatter?

    Press each key you suspect about 20 times at your normal typing speed, letting it come fully back up each time. The chatter test times the gap between letting go and the next press. A gap shorter than the limit, 40 ms by default, is a double press, and the key turns orange.

    What limit should I set?

    40 ms catches real chatter while leaving fast deliberate presses alone. Real bounce usually shows up as a gap of a few milliseconds up to about 30 ms. If you are a very fast typist and see flags on keys that seem fine, lower the limit to 25 or 30 ms.

    How do I fix keyboard chatter?

    Blow compressed air under the key, then press it rapidly 50 to 100 times to wipe the contacts. If it keeps happening, raise the debounce time in the keyboard's software if it has one, swap the switch on a hot-swap board, or claim the warranty. Windows also has a Filter Keys setting that ignores quick repeats.

    Is chatter the same as a key repeating when held?

    No. Holding a key makes your system repeat it on purpose after a short delay, which this test ignores. Chatter happens on a single quick press, when one press arrives as two.

    Can a laptop keyboard chatter?

    Yes, though it is rarer than on mechanical keyboards. Laptop keys use a membrane under each key, and crumbs or a spill can make a key send extra presses. The fixes are cleaning with compressed air or a keyboard replacement under warranty.