This jitter click test counts your clicks for 10 seconds while you jitter click, then scores the run against jitter clicking ranks instead of normal clicking. Jitter clicking shakes the whole hand, so the test also records where every click landed and gives you a cursor drift score: how far the pointer wandered while you clicked. A high CPS with low drift is what you want in a game. You can change the timer from 1 to 100 seconds, use the right button instead of the left, and run it with any wired or wireless mouse on Windows, Mac, ChromeOS and Linux.
How to jitter click, step by step
- Hold the mouse in a claw grip. Arch your hand so your index fingertip sits on the front half of the left button, with the palm barely touching the back.
- Rest your forearm on the desk. Your wrist stays just off the desk so the hand can move.
- Tense your forearm. Squeeze the muscles along the top of your forearm, as if making a fist without closing it, until your hand starts to shake slightly.
- Lock your clicking finger. Keep the finger stiff and let the vibration press the button. You are not moving the finger on purpose.
- Press lightly. The button only needs to travel a fraction of a millimetre. Pressing hard slows the vibration down.
- Aim with your arm. Move the mouse from the elbow and shoulder, not the wrist, so the shake does not throw your aim.
- Practise in short bursts. Five to ten seconds at a time, then relax your hand completely before the next run.
How to use the jitter click test
- The style is already set to Jitter and the timer to 10 seconds. Pick 5 seconds for a burst or 30 to 60 seconds to test stamina.
- Put the pointer in the middle of the pad and start jitter clicking. The timer starts on your first click.
- Keep going until the timer runs out. Each yellow dot on the pad marks where a click landed.
- Read your CPS, rank and Cursor drift on the result card. The graph shows where your speed dropped.
What your jitter click score means
| Rank | CPS over 10 seconds | CPS over 5 seconds |
|---|---|---|
| Warming up | under 6 | under 6 |
| Steady | 6 to 7.5 | 6 to 8 |
| Quick | 7.5 to 9.5 | 8 to 10 |
| Fast | 9.5 to 11.5 | 10 to 12 |
| Very fast | 11.5 to 13.5 | 12 to 14 |
| Elite | 13.5 and up | 14 and up |
Cursor drift is the average distance of each click from the middle of all your clicks. Under 10 px is steady aim, 10 to 25 px is some shake, and over 25 px means the vibration is moving the mouse as well as the button. Consistency is lower for jitter clicking than for normal clicking, because the vibration is never perfectly even. Between 75 and 90% is normal.
Your aim shakes too much
A drift score over 25 px means the tension is reaching your wrist and moving the whole mouse.
- Lower the mouse sensitivity or DPI a step, so the same shake moves the cursor less on screen. The mouse sensitivity test shows what your mouse is set to.
- Rest more of your forearm on the desk to anchor it.
- Tense the forearm a little less. Fast but wild clicks miss more in a game than slightly slower steady ones.
- Practise tracking a target while you click with an aim trainer.
Your speed drops after a few seconds
The graph shows it as a falling line, and Start to end shows the drop as a percentage. Holding a muscle tense tires it quickly, so a fall of 15 to 25% over 30 seconds is normal. Breathe normally rather than holding your breath, relax your shoulder, and build up with 10 second runs before you try longer ones. If your speed falls away after only 3 or 4 seconds, you are squeezing too hard.
Clicks double up or the mouse starts double clicking
If the result card warns that clicks came less than 20 ms apart, your mouse switch is bouncing and adding clicks of its own. That inflates the score, and the same fault shows up in daily use as double opened files. Check the button on the mouse double click test at a normal pace. Jitter clicking adds a lot of wear, so a switch that double clicks after months of practice is common. The guide for mouse double clicking covers cleaning, debounce settings and replacement switches.
Is jitter clicking bad for your hand?
Holding the forearm tense and vibrating for long periods strains the muscles and tendons that run to your fingers. Warm up with a few relaxed normal clicks, keep each run short, and take a proper break after a few minutes of practice. Stop if you feel pain, tingling or numbness, and see a doctor if it does not go away. Nobody needs hours of jitter practice to get faster.
Mice that suit jitter clicking
Any mouse can jitter click, but some make it easier:
- Light mice, around 60 to 80 grams, move less when your hand shakes.
- A shape that fits a claw grip, with a short hump and room for the fingertip at the front of the button.
- Crisp switches with a short travel, so a light tap clicks without a firm push.
- A matte or textured button so the fingertip does not slide.
Jitter clicking in Minecraft PvP
Jitter clicking became popular in Minecraft Java Edition 1.8 PvP, where there is no attack cooldown, so more clicks give more chances to land a hit the moment your opponent can be hit again. It is a physical technique rather than software, and most servers allow it, but some anticheats flag very high click speeds, so check the rules where you play. Compare it with the butterfly click test, or try the kohi click test, a 10 second test named after a Minecraft PvP network. For plain one finger speed, the cps test has the normal clicking ranks.
What a jitter click test cannot measure
The test sees clicks and pointer positions as the browser receives them. It cannot measure the tension in your arm or how tired the muscles are, and drift depends on your mouse sensitivity, so compare drift scores only at the same DPI and pointer speed.
Jitter clicking questions
What is jitter clicking?
Jitter clicking is a way to click faster by tensing the muscles in your forearm until your hand vibrates. The vibration makes your finger tap the button far more often than a normal click, usually 10 to 13 times a second once you have practised.
What is a good jitter click CPS?
Over 10 seconds, 7.5 to 9.5 CPS is a solid start, 9.5 to 11.5 is fast and anything over 13.5 is elite. Over 5 seconds the bands are a little higher. People who keep practising often settle between 10 and 13.
Is jitter clicking bad for your wrist?
It can be if you overdo it. Holding the forearm tense puts strain on the muscles and tendons. Keep sessions short, rest between runs, and stop if you feel pain, tingling or numbness in your hand or forearm.
What is the difference between jitter and butterfly clicking?
Jitter clicking uses one finger driven by forearm vibration. Butterfly clicking uses two fingers tapping the same button in turn. Butterfly usually scores higher, while jitter keeps one finger free and works on any mouse.
Can you jitter click on a laptop touchpad or phone?
Not well. A touchpad needs a full press or a tap for each click, and a phone screen ignores the light vibrating taps that jitter clicking relies on. Use a mouse for this test.
Does jitter clicking damage the mouse?
It adds wear to the switch, since every click counts towards its rated life. Heavy jitter clicking is one reason gamers see switches start to double click after a year or two.